[ Outline ] · Standard · Linear+ Help with System Case Connections

[forbin]

Guys .. This is my 1st build .. I purchased a Mach Speed N2PAP-Ultra MB installed in a Antec CS200B Builders Series case. My confusion is connecting the front panel wires to the MB. I have a 4 over 5 Header configuration .. From the lousy graphics and horrible directions and my crappy eye sight .. The issue is the picture shows that the top row contains the 'Power LED' and 'Power Button' cable and the botton row contains the 'HDD LED' and 'Reset Button' cable.

My problem is that all the connecters are 2 pins except for the 'Power LED' which is 3 pins. The bottom row has one open pin (no big deal) .. but the top row does not have room for the 3 pin Power LED. The Power button and Reset button work fine.

Anyone have any clues? I was also thinking that to get around this problem (if no solution is found) I could use the 2nd or 3rd HDD LED cable (The Antec comes with 3 HDD LED's) and connect it to the 'Power LED' connection on the MB.

Any help and/or opinions?

P.S. The bios sees all my HW, so I'm pretty excited that this is the only stumbling block and was hoping that WinXp wouldn't complain too loudly on the different configuration. LOL .. Won't boot. Looks like it's time for ANOTHER reinstall.

Thanks

This post has been edited by forbin: Oct 2 2004, 02:08 AM

[forbin]

Thanks .. Nope not using the SFAN2 connector .. U think I could use that??

I could try to move the + wire to the middle pin (so I would use the 2 right most pins) .. But if the middle pin is not used then why would you use a 3 pin connector??
Was also thinking of connecting the second HDD LED to the Power LED .. I think I have options, but was curious if I was overlooking something

I also looked at my father-in-law's box and he also has a seperate location for the Power LED switch .. not mine though .. I was really going for budget on this box (The board was $75US with a $30 rebate) and mainly interested in getting a stable server .. Will build a decent box christmas time.